How to Prepare Your Asphalt for Patching

When it comes to repairing asphalt, there are a few different techniques you can use. One of the most popular is asphalt patching. Before you begin, make sure you have all the supplies you need and know how to do the technique properly. Here are four tips for the best asphalt patching technique: 

1. Prepping the Area: Make sure the area you're going to patch is clean and free of any debris. This includes removing any oil, gas or water lines, or other fixtures that might be in the way. If necessary, use a shovel to remove any loose material. If you are looking for asphalt repair you can simply browse the web.

2. The Patching Process: Start by laying down a layer of tarps or plastic sheeting on top of the area to be patched. This will help protect your work surface and keep debris out of your mix. Use a trowel or garden spade to create a smooth surface for your asphalt mix. 

3. The Asphalt Formula: Choose the right asphalt formula for the job at hand. For example, if you're patching a pothole, use a thicker mixture that will fill in more quickly than if you were repairing a tire hole. 

Important Considerations When Patching

When patching asphalt, there are a few important considerations that should be taken into account. One of the most important factors is the type of asphalt being patched. Different types of asphalt require different techniques in order to repair them properly. Here are some tips on how to patch asphalt of different types:

Patching Asphalt With Hot Spots

If the asphalt surface has hot spots, the best technique is to use a hot spot patching gun. This gun heats up the asphalt and causes it to flow more easily. First, make a small hole in the hot spot with a drill. Then, using the gun, place the hot asphalt around the hole. Once it's cooled down, you can fill in the hole with regular tar and gravel.

Patching Asphalt With Cold Spots

If the asphalt surface has cold spots, the best technique is to use a cold spot patching gun. This gun uses cold asphalt which is less likely to cause heat buildup and cracking. First, make a small hole in the cold spot with a drill. Then, using the gun, place the cold asphalt around the hole. Once it's cooled down, you can fill in the hole with regular tar and gravel.